塑胶原料 > 行业新闻 > 今日新到产品

Polymist® F5A EX

Polymist® F5A EX

2018-09-10 09:51:28

  

Polymist® F5A EX      
Polytetrafluoroethylene      
Product Description
Polymist® F5A EX is a white PTFE micronized powder PTFE micronized powder composed of discrete particles.
Designed for use in critical engineering and high end performance plastics applications, Polymist® F5A EX will improve wear resistance and reduce coefficient of friction.
 
Main features of Polymist® F5A EX are:
 
Better wear resistance
 
Increased pressure x velocity (PV) limits
 
Reduced friction
 
Improved stick-slip response
 
Improved mold release
 
General  
Uses  Additive
Appearance  White
Forms  Powder

Physical Nominal Value Unit Test Method
Average Particle Size - D50  12 µm Internal Method
Bulk Density 500 g/l ASTM D4895
Specific Surface Area 3.0 m²/g Internal Method
Additional Information Nominal Value Unit Test Method
Melt Temperature 325 to 335 °C ASTM D3418

Storage and Handling
 
The usual precautions for safe storage and handling of Polymist® F5A EX should be taken according to material safety documentation and experience. There will be no chemical deterioration of the Polymist® F5A EX during proper storage.
 
 
Shelf life of Polymist® F5A EX micronized powders will vary depending upon whether the recommended storage conditions are maintained and whether the material remains free from foreign contamination during storage time (not exposed to dirt, dust, water or other chemicals). The material should remain sealed in the original containers and storage conditions should provide for protection from temperature extremes as well as rain, snow or other wet environments (or such conditions which may damage the storage containers in which the product is stored).
 
 
Safety and Toxicology
 
Before using Polymist® F5A EX PTFE micronized powders, consult the product Material Safety Data Sheet and follow all label directions and handling precautions.
 
As with all PTFE materials, handling and processing should only be carried out in well ventilated areas. Vapor extractor units should be installed above processing equipment. Fumes must not be inhaled and eye and skin contact ought to be avoided. In case of skin contact wash with soap and water. In case of eye contact flush with water immediately and seek medical help.
 
Do not smoke in areas contaminated with powder, vapor or fumes.
 
See Material Safety Data Sheet for detailed advice on waste disposal methods.
 
 
Packaging
 
Polymist® F5A EX is packaged in 25 kg nonreturnable drums. Each drum has two bag liners made of polyethylene resin.

上一篇:POLYFLON™ M-532

下一篇:Polymist® F5A

点击这里给我发消息 点击这里给我发消息