Fluoroplex COMP 25 RJ - GMP

2018-09-10 09:21:58

Fluoroplex COMP 25 RJ - GMP
Polytetrafluoroethylene

Product Description
Fluoroplex COMP 25 RJ - GMP is a Polytetrafluoroethylene (PTFE) product. It can be processed by injection molding or sintering and is available in Latin America or North America.
General
Additive	Unspecified Additive

Features	Good Flow

Processing Method	Injection Molding	Sintering

Physical	Nominal Value	Unit	Test Method
Specific Gravity	2.23 to 2.27	g/cm³	Internal Method
Apparent Density	0.62 to 0.68	g/cm³	Internal Method
Shrinkage - Sintering	0.60 to 1.5	%	Internal Method
Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)	61 to 68		Internal Method
Elastomers	Nominal Value	Unit	Test Method
Tensile Strength	13	MPa	Internal Method
Tensile Elongation (Break)	130	%	Internal Method
Additional Information	Nominal Value	Unit	Test Method
Flow Time - 50 grams	3.0 to 4.5	sec	Internal Method
Sintering Temperature - Maximum	365	°C
Code: 010009502
Injection	Nominal Value	Unit
Mold Temperature	21.0 to 25.0	°C
Injection Pressure	53.9 to 63.7	MPa