塑胶原料 > 行业新闻 > 今日新到产品

Algoflon® F 5 FT

Algoflon® F 5 FT

2018-09-10 09:13:07

  

Algoflon® F 5 FT      
Polytetrafluoroethylene      
Product Description:      
Algoflon® F 5 FT is a fine cut homopolymer PTFE powder that is white, granular and non-free flowing powder. It is designed for compounds production and in particular it is recommended for use with high filler content.
Dark compounds based on Algoflon® F5 FT show optimum isotropic behavior and very good longitudinal mechanical properties.
       
Main features of Algoflon® F 5 FT are:      
       
High bulk density      
       
Optimum blendability      
       
Isotropic properties      
       
Very good mechanical and electrical properties    
       
       
General  
Features  Good Chemical Resistance
Uses  Additive Blending  
Agency Ratings  FDA 21 CFR 177.1550
Appearance  White
Forms  Powder

Physical Nominal Value Unit Test Method
Specific Gravity 2.17 　 ASTM D792
Average Particle Size 2 22 µm Internal Method
Bulk Density 400 g/l ASTM D4894
Shrinkage - Radial  3.3 % ASTM D4894
Mechanical Nominal Value Unit Test Method
Elongation at Break 330 % 　
Tensile Strength 40 MPa ASTM D4894
Additional Information
Processing
Algoflon® F 5 FT is used for preparing filled products based on PTFE resins. Prior to use, the powder needs to be conditioned above 19°C/66°F. In order to obtain fully homogeneous compounds, it is necessary to mix Algoflon® F 5 FT and filler with high shear systems.
Temperature must also be controlled (it should not rise above 40°C/104°F) during the mixing process to avoid agglomeration of PTFE and generation of white spots.
Storage and Handling
Algoflon® PTFE fine cut powders must be stored and handled carefully to achieve defect free compounds and items. Temperatures that are too high should be avoided to prevent powder lumping and poor flow.
Storage and handling facilities should be clean since even very small foreign particles can cause defects in finished products. Keep resin drums closed and clean. Good housekeeping and careful handling are essential.
Safety and Toxicology
Before using Algoflon® PTFE fine cut powders, consult the product Material Safety Data Sheet and follow all label directions and handling precautions.
As with all PTFE materials, handling and processing should only be carried out in well ventilated areas. Vapor extractor units should be installed above processing equipment. Fumes must not be inhaled and eye and skin contact ought to be avoided. In case of skin contact, wash with soap and water. In case of eye contact, flush with water immediately and seek medical help.
Do not smoke in areas contaminated with powder, vapor or fumes.
See Material Safety Data Sheet for detailed advice on waste disposal methods.
Packaging
Algoflon® F 5 FT is packaged in 25 kg nonreturnable drums. Each drum has two bag liners made of polyethylene resin.
Additional Technical Information
For Material Safety Data Sheet or additional technical information, consult your Solvay sales representative or the website: www.solvayspecialtypolymers.com

上一篇:Algoflon® D 3511 F

下一篇:Algoflon® F 5/S

点击这里给我发消息 点击这里给我发消息