塑胶原料 > 行业新闻 > 今日新到产品

Algoflon® D 1610 F

Algoflon® D 1610 F

2018-09-10 09:15:27

  

Algoflon® D 1610 F      
Polytetrafluoroethylene      
Product Description:      
Algoflon® D 1610 F is a PFOA-free white aqueous PTFE dispersion. It is designed for additivation of plastics and is particularly recommended for use as anti-drip in flame retardant formulations.
       
Algoflon® D 1610 F exhibits good wetting properties and shear stability.  
       
Main features of Algoflon® D 1610 F PTFE dispersion are:    
       
NO polyethoxylated alkylphenols      
       
Very good wetting properties      
       
Good shear stability      
       
Excellent anti-dripping effect      
       
General  
Features  Good Chemical Resistance High Heat Resistance Low Friction
Uses  Additive Impregnation Applications  
Appearance  White
Forms  Latex

Physical Nominal Value Unit Test Method
Average Particle Size 250 nm Internal Method
Density 1.51 g/cm³ ASTM D4441
pH > 9.0 　 ASTM D4441
Additional Information Nominal Value Unit Test Method
Non Ionic Surfactant - (on the mixture)  3.5 wt% ASTM D4441
PTFE Content - (on the mixture)  60 wt% ASTM D4441
Processing
Algoflon® D 1610 F can be processed undiluted or diluted using distilled or deionized water.
Storage and Handling
Algoflon® PTFE dispersions must be stored under suitable temperature conditions to ensure prolonged stability. Temperatures lower than 5°C must be avoided to prevent irreversible settling. Also, some settling may occur on prolonged standing and/or heat exposure. It is therefore strongly recommended that the product is always kept at temperatures below 35°C. The optimum storage temperature range is 10-25°C. It is also advisable that the product is homogenized by gentle rolling or stirring once per month and prior to use.
Safety and Toxicology
Before using Algoflon® PTFE dispersions consult the product Material Safety Data Sheet and follow all label directions and handling precautions. As with all PTFE materials, handling and processing should only be carried out in well ventilated areas. Venting units should be installed above processing equipment. Fumes must not be inhaled and eye and skin contact ought to be avoided. In case of skin contact wash with soap and water. In case of eye contact flush with water immediately and seek medical help. Do not smoke in areas contaminated with powder, vapor or fumes. See Material Safety Data Sheet for detailed advice on waste disposal methods
Packaging
Algoflon® D 1610 F is packaged in either 30 kg drums or 1500 kg IBC's.
Additional Technical Information
For Material Safety Data Sheet or additional technical information consult your Solvay Specialty Polymers sales representative.

上一篇:Uniflon UNILUB 5

下一篇:Algoflon® D 1614 F

点击这里给我发消息 点击这里给我发消息