Uniflon GM 800

2018-09-10 09:16:16

Uniflon GM 800
Polytetrafluoroethylene
Product Description:
Uniflon GM 800 is a Polytetrafluoroethylene (PTFE) product. It can be processed by injection molding or sintering and is available in Latin America or North America

General
Features	Good Flow

Processing Method	Injection Molding	Sintering

Physical	Nominal Value	Unit	Test Method
Specific Gravity	2.15 to 2.19	g/cm³	Internal Method
Apparent Density	0.60 to 0.95	g/cm³	Internal Method
Particle Size Distribution - d50	511.0 to 771.0	µm	Internal Method
Shrinkage - Sintering	2.0 to 4.0	%	Internal Method
Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)	55 to 65		Internal Method
Elastomers	Nominal Value	Unit	Test Method
Tensile Strength	20	MPa	Internal Method
Tensile Elongation (Break)	200	%	Internal Method
Additional Information	Nominal Value	Unit	Test Method
Flow Time - 50 grams	1.5 to 3.0	sec	Internal Method
Sintering Temperature - Maximum	375	°C
Code: 010029901
Injection	Nominal Value	Unit
Mold Temperature	21.0 to 25.0	°C
Injection Pressure	19.6 to 34.3	MPa