铁氟龙, 氟橡胶, 铁氟龙FEP, PVDF法国阿科玛9000HD, ETFE日本旭硝子C-88AX, PFA美国杜邦340, PA66/F/PTFE美国液氮RFL-403, PA66/PTFE美国液氮RL-4040, POM/PTFE基础创新塑料KL004
Arlon® 1000 | |||
Polytetrafluoroethylene + PI | |||
Product Description: | |||
Greene, Tweed's Arlon® 1000, a tough, hig temperature, semi-crystalline thermoplastic, offers a unique combination of mechanical, thermal and chemical propertier. Arlon 1000 features superior compressive strength and minimum creep, as well as broad chemical resistance. Arlon is an excellent choice for applications such as valve seats and bushings greater abrasion resistance and lower wear and better fatigue properties than other thermoplastics. |
General | |||
Features | Acid Resistant | Good Abrasion Resistance | Good Wear Resistance |
Alkali Resistant | Good Chemical Resistance | Low Extractables | |
Base Resistant | Good Compressive Strength | Radiation (Gamma) Resistant | |
Fatigue Resistant | Good Creep Resistance | Semi Crystalline | |
Food Contact Acceptable | Good Toughness | ||
Uses | Bushings | Valves/Valve Parts | |
Agency Ratings | FDA 21 CFR 177.2415 | ||
Appearance | Tan | ||
Forms | Pellets | ||
Processing Method | Injection Molding | ||
Physical | Nominal Value | Unit | Test Method |
Specific Gravity | 1.3 | g/cm³ | ASTM D792 |
Hardness | Nominal Value | Unit | Test Method |
Rockwell Hardness (M-Scale) | 104 | ASTM D785 | |
Durometer Hardness (Shore D) | 88 | ASTM D2240 | |
Mechanical | Nominal Value | Unit | Test Method |
Tensile Modulus - 0.5% Secant | 4240 | MPa | ASTM D638 |
Tensile Strength | ASTM D638 | ||
Yield | 108 | MPa | |
Break | 96.5 | MPa | |
Tensile Elongation (Break) | 35 | % | ASTM D638 |
Flexural Modulus - 0.5% Secant | 4140 | MPa | ASTM D790 |
Flexural Strength | 174 | MPa | ASTM D790 |
Compressive Strength 2 | 131 | MPa | ASTM D695 |
Shear Strength | ASTM D732 | ||
-- 3 | 85.5 | MPa | |
-- 4 | 85.5 | MPa | |
Coefficient of Friction 5 (vs. Itself - Dynamic) | 0.29 | ASTM G77 | |
Deformation Under Load | 0.0900 | % | ASTM D621 |
Wear Factor | 100 | 10^-8 mm³/N·m | ASTM G77 |
Thermal | Nominal Value | Unit | Test Method |
Deflection Temperature Under Load (1.8 MPa, Unannealed) | 177 | °C | ASTM D648 |
CLTE - Flow | ASTM E228 | ||
< 149°C | 4.7E-5 | cm/cm/°C | |
> 149°C | 1.4E-4 | cm/cm/°C | |
2Break | |||
3Transverse | |||
4Axial | |||
5PV + 12600 psi-ft/in |
下一篇:Arlon® 25FR