3M™ Dyneon™ PTFE Compound TF 4303

2018-09-08 17:55:42

3M™ Dyneon™ PTFE Compound TF 4303
Polytetrafluoroethylene
15% Graphite Fiber
Product Description:
Features

Dyneon™ PTFE Compound with 15 % graphite

Free flow compound

General
Filler / Reinforcement	Graphite Fiber, 15% Filler by Weight
Filler / Reinforcement	Graphite Fiber, 15% Filler by Weight
Features	Good Flow
Features	Good Flow
Processing Method	Compression Molding	Sintering
Processing Method	Compression Molding	Sintering

Physical	Nominal Value	Unit	Test Method
Specific Gravity	2.17	g/cm³	ASTM D4745-06
Apparent Density	0.73	g/cm³	ASTM D4894-07
Molding Shrinkage - Flow	2.3	%	ASTM D4894-07
Hardness	Nominal Value	Unit	Test Method
Shore Hardness² (Shore D)	69		DIN 53505
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength² (Break)	23.5	MPa	ASTM D4745-06
Tensile Elongation² (Break)	290	%	ASTM D4745-06
Additional Information	Nominal Value	Unit
Compression Molding Molding Pressure	50	MPa
Compression Molding Temperature	23 to 26	°C
Sintering Temperature	< 365	°C

²Measured on sintered moldings

3M&#8482; Dyneon&#8482; PTFE Compound TF 4303